bambu studio

Attention over time

7-day rolling share of analyzed posts/comments mentioning this entity · 90 daily points ending 2026-09-01

Final complete day: 2026-09-01. Attention was 0.1% — this entity appeared in 17 of 17,943 analyzed posts/comments in the seven days ending that day (24 mentions).

Each point is a seven-day rolling window of complete UTC days; a point is comparable only when at least 100 analyzed posts or comments fall inside it. A day with no analyzed records counts as zero; missing coverage is marked and never shown as zero. The series ends at the latest complete analyzed day — it never extends into the current incomplete day. How attention is measured.

Recent mentions

1. 2026-09-01 18:48 UTCPost

   Testing a no-CAD cutter workflow: picked an icon, sliced in Bambu Studio, and printed a razor-sharp clay/cookie cutter. - Getting clean, sharp edges on custom cookie and clay cutters usually takes annoying prep work—either fixing non-manifold lines in CAD or tracing vectors by hand. Tested out a direct icon-to-cutter generation workflow for this print: * **Icon selection:** Picked an open-source outline directly from a built-in library instead of drawing an SVG from scratch. * **Blade geometry:** Automatically lofted a stepped blade profile (tapering down to a thin cutting edge) with a reinforced base flange for hand grip. * **Slicing & Print settings (Bambu Studio / OrcaSlicer):** * **Wall generator:** Arachne (or **Detect Thin Walls: ON** — mandatory for the tapered cutting tip so the slicer doesn't skip the sharpest top layers) * **Walls:** 3 perimeters for strength on the flange * **Layer height:** 0.16 mm (Optimal for sharp top slopes) * **Nozzle:** 0.4 mm Stainless / Hardened * **Material:** Basic PLA / Tough PLA The exported mesh sliced cleanly with zero internal gap artifacts, and the test press in clay came out with crisp, separated lines.

2. 2026-09-01 17:36 UTCComment

   Looks great, for some reason I could never get accustomed to PS´s UI, whereas I got Orca and BS fairly quickly. Plugins are going to be huge. I did find the ecosystem of many forks to be untenable. I do hate how Bambu Studio handles multiple nozzle sizes, so I hope this new version inherits a more logical and useful way to manage those in Bambu Studio.

3. 2026-09-01 00:30 UTCPost

   What is happening here? - Left is bambu studio on a1 mini, right is on elegoo slicer on centauri carbon 2. All the settings are the same, 0.12mm layer height, the elegoo slicer is losing some detail and parts

4. 2026-08-31 23:16 UTCComment

   That's pretty straightforward. You need the logo in SVG format. Right-click the model in bambu studio, find "add part" in the menu, then find add SVG in the submenu. Once you select your svg file, it should take you to an interface to place it on your model. You will almost certainly need to scale the logo down. There's more after that to get it in a different color, google "add SVG to model in Bambu Studio" to find videos showing exactly how to do it.

5. 2026-08-31 20:48 UTCPost

   Is there a way to "force" support? - I'm trying to print a gear model, one of the parts have an "inverted" triangle shape.. When I enable supports, that part doesn't get one, I'm thinking since it's too small? and if I print it like that it just sogs since the first layer extends 0.5mm and has no place to sit on.. I'm using Bambu Studio btw