makerworld

Attention over time

7-day rolling share of analyzed posts/comments mentioning this entity · 90 daily points ending 2026-10-16

Final complete day: 2026-10-16. Attention was 0.5% — this entity appeared in 55 of 12,303 analyzed posts/comments in the seven days ending that day (58 mentions).

Each point is a seven-day rolling window of complete UTC days; a point is comparable only when at least 100 analyzed posts or comments fall inside it. A day with no analyzed records counts as zero; missing coverage is marked and never shown as zero. The series ends at the latest complete analyzed day — it never extends into the current incomplete day. How attention is measured.

Recent mentions

1. 2026-10-16 23:04 UTCComment

   Thank you so much for posting the .scad file on makerworld!

2. 2026-10-16 16:53 UTCPost

   Free modular organizer: 14 sizes, 3 heights, hidden connectors, prints without supports - Made a modular tray system for my bathroom cabinet: 14 sizes, 3 heights, connectors hidden underneath I wanted something tidier for my bathroom cabinet than random boxes, so I ended up designing a whole set of trays. Everything sits on a 50 mm grid, so any tray lines up with any other. There are 14 sizes from 1x1 to 4x5, and each one comes in 25, 47.5 and 95 mm height. Three wall textures to pick from (twist, wave, diamond). The inside is smooth with a rounded edge at the bottom, so the last cotton pad doesn't get stuck in a corner. The trays connect with small bone-shaped pieces that push into pockets in the bottom, so you can't see them from above. Getting the fit right took a few test prints on my P1S: 6.0 mm heads were loose, 6.5 way too tight, 6.2 is snug. If they come out tight or loose on your printer, scaling the connectors to 98% or 102% should sort it. They also stack. The 45° foot drops into the rim of the tray below and centres itself. No supports, no brim. I printed in matte PLA with 0.2 mm layers, 2 walls and 10% gyroid. Every size is on its own plate in the 3MF. Free on MakerWorld:

3. 2026-10-16 14:17 UTCComment

   Have an ender 3 V2 neo myself and think my next purchase is going to be a Bambu Lab A1 Combo, the Creality multi colour options seem cheaper like for like but I think the compatibility with Bambu studio and makerworld that I find particularly good makes me more inclined to go Bambu lab even for the extra few quid. Best of luck with your repair/upgrade.

4. 2026-10-16 12:09 UTCComment

   Good idea. But then hiding such a useful tool for accessibility on Makerworld is a choice. That platform is an absolute shitshow for anyone that doesn't want to give their data to Bambu.

5. 2026-10-16 11:46 UTCPost

   I made a universal key turner using flexible 3D printed pins to help with arthritis and weak grip - Hi everyone! I wanted to share a little project I’ve been putting my heart into recently. Turning a house or car key seems like such a tiny everyday thing, but if you deal with arthritis, hand pain, or weak grip, it can honestly ruin your day. I wanted to build something super simple that anyone can just pick up and use right away, with zero setup. No tiny screws to tighten, no measuring keys beforehand, and no complicated adjustments. **The idea behind it:** Inside the knob, I placed a bed of soft, flexible TPU pins. When you push it against a key, the pins simply bend and hug whatever shape the key has, gripping it tight. The outside is nice and rounded, shaped so you can just press it with the palm of your hand and turn without having to pinch or hurt your fingers. You can just keep it by the front door or in a pocket and use it on pretty much any key. **For printing:** * The outer handle prints in standard PLA or PETG. * The inner cushion is flexible TPU (I used 95A). * The two parts just press together cleanly, no glue or extra hardware needed. The project is 100% free and open for everyone on MakerWorld: If you know someone who might find this useful, or if you end up printing one, I’d genuinely love to know how it feels in hand and how it works for you!