slicer

Attention over time

7-day rolling share of analyzed posts/comments mentioning this entity · 90 daily points ending 2026-09-01

Final complete day: 2026-09-01. Attention was 1.5% — this entity appeared in 264 of 17,943 analyzed posts/comments in the seven days ending that day (318 mentions).

Each point is a seven-day rolling window of complete UTC days; a point is comparable only when at least 100 analyzed posts or comments fall inside it. A day with no analyzed records counts as zero; missing coverage is marked and never shown as zero. The series ends at the latest complete analyzed day — it never extends into the current incomplete day. How attention is measured.

Recent mentions

1. 2026-09-01 23:45 UTCPost

   Por qué me salen estos aros en mi impresión - Hola hace poco le cambié la boquilla a mi impresora 3D creality ender 3 V3 SE con klipper de la stock de 0.4mm a una de 0.2mm y me ha empezado a dar problemas a la hora de imprimir. me aparecen estos aros en las orillas de mi impresión. Con la boquilla anterior me imprimía bien. He hecho el cambio en la boquilla y altura de capa en orca slicer.

2. 2026-09-01 22:23 UTCComment

   **Matcap+Surface** is the geometry plus its corresponding textures. The surface details you're seeing are from a Normal Map that has been baked from a more detailed version of the mesh. Basically, it's faking the fine details of the detailed mesh onto the simpler version so it's computationally cheaper to display in a real-time renderer, think games. Slicers only process the actual geometry, so they won't process those details since they're coming from a texture. It's possible to use the textures & recreate the details into geometry but it can be fairly imperfect, nuanced & time-consuming. The results would vary from model to model & their corresponding textures. You would need to be fairly comfortable with 3D Modelling.

3. 2026-09-01 21:56 UTCComment

   What does the flow look like in that area in the slicer, seems like it starts flowing too late. Perhaps too much retraction or like coasting/(other settings to hide seams better).

4. 2026-09-01 21:41 UTCPost

   My tallest print so far - I bought this secondhand Anycubic Kobra 2 Max. And it had several issues, although some were Anycubic Slicer issues and me learning it. I found this printer to be a bit unreliable with its auto levelling and z-offset settings. It also had a nozzle and hot end clog. An issue where a slicer update reset some of my saved settings. And the z-offset needed to he changed if there was no raft or brim layer. But all that is solved and now I am looking forward to printing long and big objects. Any prop gurus managed to work out what this piece is from?

5. 2026-09-01 21:12 UTCComment

   All corners look good in a slicer. No random gaps anywhere and the object I’m printing isn’t complex as it’s a shell for drawers.