brush

Attention over time

7-day rolling share of analyzed posts/comments mentioning this entity · 90 daily points ending 2026-08-14

Final complete day: 2026-08-14. Attention was 0.3% — this entity appeared in 16 of 6,299 analyzed posts/comments in the seven days ending that day (24 mentions).

Each point is a seven-day rolling window of complete UTC days; a point is comparable only when at least 100 analyzed posts or comments fall inside it. A day with no analyzed records counts as zero; missing coverage is marked and never shown as zero. The series ends at the latest complete analyzed day — it never extends into the current incomplete day. How attention is measured.

Recent mentions

1. 2026-08-14 17:53 UTCComment

   Do you mean roll the paint in the tray and then dipping the brush in that paint? Or roll onto surface first then go over with a brush?

2. 2026-08-14 17:00 UTCComment

   Roll thin, then tip with a dry brush. If the paint is thinned properly, it will lay down and you won't see the brush strokes Don't apply with a brush and roll over it. It will be a textured mess. Buy new hardware. Metallic paint won't look good and it won't hold up to daily use

3. 2026-08-14 16:29 UTCPost

   Painting the kitchen as a newbie and looking for any tips - So my husband and I are first time home owners and beginning to take on small home improvement projects. To begin, we are going to repaint the kitchen cabinets and kitchen walls (previous owner did a sloppy paint job and it’s bugged us ever since we moved in). I have bought a bunch of supplies, and a can of paint to begin but I will admit I am nervous to mess up and no amount of YouTube videos have quelled that anxiety. How we are going about this: My husband will take off all the cabinet doors and bring them down to the basement where I will use a sanding block to get off the old paint. The cabinets themselves will be staying upstairs where I will use a sanding block on them while they’re in place. I am a bit nervous about this for a couple reasons. \-I am nervous about the dust getting everywhere even if we cover in painters tarp. I am worried that clean up will not be so simple. \-I am also nervous about the airborne aspect of this, since we have an 8 month old baby. The days that I sand I plan on waking up very early (like 1 am) to hopefully give a few hours before she’s up for the day. Thankfully our kitchen has a few windows, but I am still nervous the air won’t be as clean as we would like. After everything is sanded, I will plan on painting the cabinet doors downstairs in the basement and the cabinets upstairs. I bought the Beyond Paint Refinishing kit in color sage for the cabinets. Reviews said that the brushes included suck, so I purchased different brushes. I plan on initially putting each layer of paint on with a brush, then using a roller to give it a smoother finish (saw this in a YouTube video). I’m hoping that will work to give it the clean look we are going for. I am also looking to paint our plastic cabinet fixtures and handles from black to more of a brass color. I saw some paint at Home Depot that allegedly works to create a faux metal look. I’m curious if anyone here has used a product like that and how it’s turned out for you. After the cabinets are all squared away, I plan on tackling the walls in the kitchen. They are painted now, but it feels very bumpy and just like a lot of crap was painted over. I believe they are wooden beneath everything. Is sanding the wall necessary? We live in an older home so I’m unsure if it’s just the material or if it’s really just bad painting. I don’t want to splurge on a sanding machine, so I will have to use a sanding block and that seems a bit daunting for all the walls, but I’m willing to do it if necessary. Thankfully we are keeping the color similar, just going from the bright white it currently is to a slightly off white to make the room feel warmer. I was also considering purchasing a design stencil to do “backsplash” behind the stove and sink area. I would just paint over the stencil with the same color we are doing the cabinets to tie everything together. Tiles aren’t really in the budget and truthfully I have no idea how well they’d even stay on our wonky walls. As a newbie I’m just looking for any tips or pointers, especially if something we are planning on doing sounds off.

4. 2026-08-14 14:18 UTCComment

   Self-clean rinses the nozzle, it doesn't scrub it. Fine for day to day, useless against the mineral film that builds up over months, especially on hard water. You don't need the dedicated brush though. Extend the nozzle manually (most units have a setting for it), wipe it with a cloth and a little vinegar, let it sit a minute if there's scale. Once a month is plenty. Those brushes work, they're just a purpose-built product for a job a rag already does.

5. 2026-08-14 07:30 UTCComment

   I do the glove and brush thing too but never with bleach, that feels like asking for a chemical burn in a sensitive area. I use white vinegar instead, let it soak for a minute then scrub with an old toothbrush. The self clean on mine basically just rinses the nozzle for a second, barely does anything if you have hard water buildup. Those little brushes on amazon look like they'd work fine but honestly a toothbrush is the same thing and you probably already have one.